EPDAS / FORKLIFTS
K40 Diesel Forklift
Source-listed rated capacity of 4,000 kg at a 500 mm load center, with a standard lift height of 3,000 mm.
Request an inquiry
01 / Overview & rating limits
4,000 kg rated capacity at a 500 mm load center.
The supplied diesel forklift table lists K40 with a standard lift height of 3,000 mm, free lift of 150 mm and an operating weight of 4,550 kg.
The listed engine is QC490BPG, with a source-listed output entry of 40 kW / 2,650 rpm. The table specifies a mechanical manual transmission and a 60 L fuel tank.
Pending confirmationThe photograph illustrates the forklift category, not a verified K40 configuration. Confirm the actual engine, mast, attachment and destination documentation.
02 / Structure & layout information
The K40 source column lists length to fork face (without forks) of 2,820 mm, overall width of 1,240 mm, lowered mast height of 2,070 mm and overhead guard height of 2,220 mm.
Wheelbase is listed as 1,750 mm, outside turning radius as 2,650 mm and fork size as 1,070 × 122 × 50 mm. These measurements are separate source entries, not a complete site-layout drawing.
Pending confirmationA dimensioned drawing, stacking aisle specification and the offered mast/attachment envelope require confirmation.
03 / Complete source-listed specification
Every available row from the model column is retained. Source terminology and unconfirmed entries are identified rather than corrected without evidence.
| Parameter / source unit | K40 source-listed value |
|---|---|
| Rated capacity / kg | 4000 |
| load Centre / mm | 500 |
| Lift height / mm | 3000 |
| Free lift height / mm | 150 |
| Fork size / L×W×T / mm | 1070×122×50 |
| Mast tilt angle / F/R / Deg. | 6°/12° |
| Front overhang / mm | 485 |
| Rear overhang / mm | 590 |
| Min. ground clearance(Bottom of mast) / mm | 135 |
| Overall dimensions / Length to face of fork (without fork) / mm | 2820 |
| Overall dimensions / Overall width / mm | 1240 |
| Overall dimensions / Mast lowered height / mm | 2070 |
| Overall dimensions / Mast extended height (with backrest) / mm | 4065 |
| Overall dimensions / Overhead guard height / mm | 2220 |
| Turning radius(outside) / mm | 2650 |
| Speed / Travel(Unladen) / km/h | 19 |
| Speed / Lifting(Laden) / mm/sec | 400 |
| Speed / Lowering(Laden) / mm/sec | 450 |
| Max. Drawbar pull(Laden/unladen) / KN | 18（18） |
| Max. Gradeability(Laden) / % | 16 |
| Tyre / Front / mm | 28×9-15-12PR |
| Tyre / Rear / mm | 6.50-10-10PR |
| Tread / Front / mm | 1000 |
| Tread / Rear / mm | 980 |
| Wheelbase / mm | 1750 |
| Operating weight / kg | 4550 |
| Weight Distribution / Laden / Front Axle / kg | 7520 |
| Weight Distribution / Laden / Rear Axle / kg | 830 |
| Weight Distribution / Unladen / Front Axle / kg | 1600 |
| Weight Distribution / Unladen / Rear Axle / kg | 2950 |
| Battery / Voltage/Capacity / v/Ah | 12/80 |
| Engine / model | QC490BPG |
| Engine / Manufacture | (xinchai) |
| Engine / Rated output/r.p.m. / kW | 40/2650 |
| Engine / Rated torque/r.p.m. / N-m | 160/1800-2000 |
| Engine / No.of Cylinder | 4 |
| Engine / Bore×Stroke / mm | 90×100 |
| Engine / Displacement / cc | 2600 |
| Engine / Fuel Tank Capacity / L | 60 |
| Transmission / Manufacture | CHINA |
| Transmission / Type | Mechanical manual transmission |
| Transmission / Stage / F/R | 1/1（2/2） |
| Operating pressure(For attachments) / Mpa | 17.5 |
04 / Performance & operating conditions
Use the actual operating configuration
The source lists unladen travel speed of 19 km/h, laden lift speed of 400 mm/s and laden lowering speed of 450 mm/s. Its gradeability entry is 16% under the source’s laden condition. These entries do not establish suitability for an unspecified site or load.
Check residual capacity using the load center, lifting height, mast and attachment for the actual machine.
Source mass entries
Operating weight is listed as 4,550 kg. Unladen front/rear axle values are 1,600 / 2,950 kg, which total 4,550 kg. Laden front/rear axle values are 7,520 / 830 kg, which total 8,350 kg.
Pending confirmationOperating weight plus the rated 4,000 kg load equals 8,550 kg, 200 kg above the listed laden axle total. The source values are retained; confirm the mass distribution and test/configuration basis before engineering use.
05 / Application & configuration review
Loading, unloading, stacking and short-distance pallet handling.
The supplied product material names warehousing and logistics, manufacturing, ports and construction among forklift application contexts. Suitability depends on the actual load, floor, travel space, mast and attachment.
Pending confirmationAttachment packages, special-environment suitability and model-specific options have not been verified. Food or pharmaceutical use is not represented as a hygiene certification.
06 / Documents & maintenance
Request the K40 operating manual, capacity information for the offered mast and attachment, maintenance instructions and applicable destination documentation.
Pending confirmationNo K40-specific conformity document, maintenance schedule or emissions configuration is established by the supplied telehandler/engine PDFs. Warranty, spare-parts availability, delivery time and service commitments require confirmation.
Discuss your operating requirements
Make the equipment and working conditions part of your inquiry.
Include your destination, required load or output, working height, site access and preferred model.
Pending confirmationConfiguration, availability, lead times, warranty and service terms require confirmation.