EPDAS / FORKLIFTS
K35 Diesel Forklift
Source-listed rated capacity of 3,500 kg at a 500 mm load center, with a standard lift height of 3,000 mm.
Request an inquiry
01 / Overview & rating limits
3,500 kg rated capacity at a 500 mm load center.
The supplied diesel forklift table lists K35 with 3,000 mm lift height, 145 mm free lift and an operating weight of 4,390 kg.
The listed engine is QC490BPG, with source-listed output of 39 kW / 2,650 rpm. Engine configuration and destination emissions documentation must be checked against the actual offered machine.
Pending confirmationThe header image represents the forklift category and has not been verified as K35. Mast, attachment and residual-capacity evidence require confirmation.
02 / Structure & layout information
The source lists a 1,750 mm wheelbase and fork size of 1,070 × 122 × 50 mm. A dimensioned model drawing and the site-specific stacking envelope have not been supplied.
Pending confirmationOverall envelope, aisle requirements for the offered configuration and the engineering drawing remain pending. The parameter table is not a site layout.
03 / Complete source-listed specification
Every available row from the model column is retained. Source terminology and unconfirmed entries are identified rather than corrected without evidence.
| Parameter / source unit | K35 source-listed value |
|---|---|
| Rated capacity / kg | 3500 |
| load Centre / mm | 500 |
| Lift height / mm | 3000 |
| Free lift height / mm | 145 |
| Fork size / L×W×T / mm | 1070×122×50 |
| Mast tilt angle / F/R / Deg. | 6°/12° |
| Front overhang / mm | 465 |
| Rear overhang / mm | 550 |
| Min. ground clearance(Bottom of mast) / mm | 135 |
| Overall dimensions / Length to face of fork (without fork) / mm | 2750 |
| Overall dimensions / Overall width / mm | 1240 |
| Overall dimensions / Mast lowered height / mm | 2070 |
| Overall dimensions / Mast extended height (with backrest) / mm | 4065 |
| Overall dimensions / Overhead guard height / mm | 2220 |
| Turning radius(outside) / mm | 2600 |
| Speed / Travel(Unladen) / km/h | 19 |
| Speed / Lifting(Laden) / mm/sec | 400 |
| Speed / Lowering(Laden) / mm/sec | 450 |
| Max. Drawbar pull(Laden/unladen) / KN | 18 (18) |
| Max. Gradeability(Laden) / % | 18 |
| Tyre / Front / mm | 28×9-15-12PR |
| Tyre / Rear / mm | 6.50-10-10PR |
| Tread / Front / mm | 1000 |
| Tread / Rear / mm | 980 |
| Wheelbase / mm | 1750 |
| Operating weight / kg | 4390 |
| Weight Distribution / Laden / Front Axle / kg | 7080 |
| Weight Distribution / Laden / Rear Axle / kg | 810 |
| Weight Distribution / Unladen / Front Axle / kg | 1590 |
| Weight Distribution / Unladen / Rear Axle / kg | 2810 |
| Battery / Voltage/Capacity / v/Ah | 12/80 |
| Engine / model | QC490BPG |
| Engine / Manufacture | (xinchai) |
| Engine / Rated output/r.p.m. / kW | 39/2650 |
| Engine / Rated torque/r.p.m. / N-m | 160/1980 |
| Engine / No.of Cylinder | 4 |
| Engine / Bore×Stroke / mm | 90×100 |
| Engine / Displacement / cc | 2540 |
| Engine / Fuel Tank Capacity / L | 60 |
| Transmission / Manufacture | CHINA |
| Transmission / Type | Mechanical manual transmission |
| Transmission / Stage / F/R | 1/1（2/2） |
| Operating pressure(For attachments) / Mpa | 17.5 |
04 / Performance & operating conditions
Work with the specified load center
Confirm the actual load dimensions, mast, lifting height and attachment. The source-listed rating is not a universal capacity at every operating point.
Check the source mass figures
The table lists operating mass of 4,390 kg. Its laden axle values, 7,080 kg and 810 kg, total 7,890 kg; unladen axle values, 1,590 kg and 2,810 kg, total 4,400 kg. The source values are retained without adjustment.
Pending confirmationThe unladen axle total differs from the listed operating mass by 10 kg. Verify the mass distribution and offered configuration before engineering use.
05 / Application & configuration review
Loading, unloading, stacking and short-distance pallet handling.
The supplied product material names warehousing and logistics, manufacturing, ports and construction among forklift application contexts. Suitability depends on the actual load, floor, travel space, mast and attachment.
Pending confirmationAttachment packages, special-environment suitability and model-specific options have not been verified. Food or pharmaceutical use is not represented as a hygiene certification.
06 / Documents & maintenance
Request the operating manual, mast and attachment capacity information, maintenance instructions and destination-specific documentation for the offered K35 configuration.
Pending confirmationNo model-specific K35 conformity certificate or maintenance schedule is supplied. Telehandler and engine documentation must not be treated as certification of this forklift. Warranty, parts availability, installation, lead times and response terms are unconfirmed.
Discuss your operating requirements
Make the equipment and working conditions part of your inquiry.
Include your destination, required load or output, working height, site access and preferred model.
Pending confirmationConfiguration, availability, lead times, warranty and service terms require confirmation.